Browse by Tags

Re: M.D. Wright question?

MD Wright was the pioneer of the Integrated Tail Light System way back when and is still considered the Rolls-Royce for the Warrior. Nothing compares to it and you made the right choice. It's also plug-n-play and guaranteed for life (PnP) The following is taken off their site. What is the LED colors...

Posted to Installed Warrior Modifications and accessories (Forum) by AlanH on 01-30-2009
Filed under: Taillight
Re: DIY load Leveler for Integrated Tail

[quote user="Ranger_b0b"] The diodes prevent the signals from "cross-talking" because they are sharing the resistors AND a common ground from the tail light. Ok, now the part numbers... [/quote] Ranger_b0b .... when i first noticed this post i thought you had developed an automated...

Posted to Installed Warrior Modifications and accessories (Forum) by AlanH on 09-08-2008
Filed under: Taillight
Re: Fender eliminator kit ...Watch Out!

I threaded the wires as shown and tie-wrapped the LED load resistor to the new bracket when i added the Kuryakn Dual Circuit Mini Bullets and HID license plate bracket. It's important that you reinstall the factory harness into the two existing cable clips on the inside of the fender. I have 5,000...

Posted to Product Reviews (Forum) by AlanH on 07-30-2005
Filed under: Taillight
Re: M.D. Wright question?

EDITED: per JIHBONE MD Wright ONLY wants the Taillight and T/S's per the enclosed http://www.flashalert.com/integratorquestions.htm What do I need to send? We only need the brake light assembly and the turn signal wires. Warrior: Include the stock rear turn signals. We will take the turn signal apart...

Posted to Installed Warrior Modifications and accessories (Forum) by AlanH on 01-25-2009
Filed under: Taillight
Re: 12V load equalizer question - integrated taillight

[quote user="tostyj"] I bought some 12V load equalizers to slow down my the blinkers; they blink too fast as a result of my integrated taillight install. I know that I should tap into the wire harness that leads back to the taillight under the seat, but I have a question: Do you hook them up...

Posted to Technical Discussion (Forum) by AlanH on 05-31-2008
Filed under: rear light, tail light, taillight, rear turn signals, Electrical, LEQ
Re: License plate lights

Here's another option i used to eliminate the stock license light & turn signals after installing the Yami inner fender elim kit and to help increase the visibility of the bike! Radiantz Billet Clear HID License Plate Frame & Kuryakn 2372 Dual Circuit Rear Turn Signal/Running Lights w/clear...

Posted to Installed Warrior Modifications and accessories (Forum) by AlanH on 11-26-2005
Filed under: Taillight, Inner Fender Elimination Kit, IFEK
Re: flapping tail assy making me nervous...

There are (3) rubber isolation bushings w/stand-offs for the tailight assy and (4) mounting holes to the rear inside fender. The OAL length of the side mounting bolts are very very critical else you will dimple the fender if not using the Yami kit [:0] [ ] Installed Yami Inner Fender Eliminator Kit w...

Posted to Technical Discussion (Forum) by AlanH on 06-25-2007
Filed under: taillight, IFEK, Inner Fender Eliminator Kit
Re: Need under tail kit photos and ideas...

[quote user="cltgt"]I also want to know what lights Alan has...[/quote] Radiantz HID License Plate w/ Kuryakn 2372 Mini Silver Bullets Wired as Running Lights & Turn Signals For more details: Rear LED Turn Signal http://flickr.com/photos/15071518@N07/sets/72157602604624591/detail/ EDITED...

Posted to Warrior Pics and Vids (Forum) by AlanH on 10-13-2008
Filed under: IFEK, Inner Fender Eliminator Kit, Taillight
Re: Run/Turn Combo Rear Signal???

Here's another option i used to eliminate the stock license light & turn signals after installing the Yami inner fender elim kit and to help increase the visibility of the bike! Radiantz Billet Clear HID License Plate Frame & Kuryakn 2372 Red LED Dual Circuit Rear Turn Signal/Running...

Posted to Technical Discussion (Forum) by AlanH on 07-16-2006
Filed under: taillight, rear turn signals, Silver Bullets
Stock Taillight and rear turn signal wiring

In case anyone ever needs to know which wires go where for their tail section.

Posted to Technical Discussion (Forum) by RobRiguez on 07-07-2008
Filed under: rear light, tail light, wiring, taillight, rear turn signals

Page 1 of 1 (10 items)