Browse by Tags

Re: 12V load equalizer question - integrated taillight

[quote user="tostyj"] I bought some 12V load equalizers to slow down my the blinkers; they blink too fast as a result of my integrated taillight install. I know that I should tap into the wire harness that leads back to the taillight under the seat, but I have a question: Do you hook them up...

Posted to Technical Discussion (Forum) by AlanH on 05-31-2008
Filed under: rear light, tail light, taillight, rear turn signals, Electrical, LEQ
Re: Flasher?

MilwDave .... no need to disturb the flasher at all! The LEQ can be connected to the wiring under the ECU. Follow the rear fender wiring to an Opaque 6~Pin (5-wire) plug and i suggest you tap into the female plug wiring so you can remove the fender if req'd in the future. Here's some photos of...

Posted to Technical Discussion (Forum) by AlanH on 05-12-2007
Filed under: Electrical, How to, LEQ
Re: LED equalizer problem

Bob, Remember you are using the resistors in parallel so the wattage is X2 and ohms is Divided by 2 (2) 15w 5.6 ohm resistors = 30w 2.8 ohm In your case it's X3 and ohms will be Div by 3 as long as they are all the same specs! Here's the mounting: http://flickr.com/photos/15071518@N07/1686150643...

Posted to Technical Discussion (Forum) by AlanH on 11-07-2008
Filed under: How to, LEQ
LEQ Kuryakyn 4807 & 4810

Rif ... here is my personal experience with 2 Kuryakyn 4807's but if yours works fine that's great [ ] Taken from this recent post - Decompression Solenoid Failure : http://www.rswarrior.com/forums/topic.asp?TOPIC_ID=54312 warpack ....The Kuryakyn 4807 although advertised as 4 amp load equalizer...

Posted to Technical Discussion (Forum) by AlanH on 09-29-2007
Filed under: LEQ
Re: LED equalizer problem

[quote user="Badger"] [quote user="AlanH"] Bob, Remember you are using the resistors in parallel so the wattage is X2 and ohms is Divided by 2 (2) 15w 5.6 ohm resistors = 30w 2.8 ohm In your case it's X3 and ohms will be Div by 3 as long as they are all the same specs! Oops! Forgot...

Posted to Technical Discussion (Forum) by AlanH on 11-07-2008
Filed under: LEQ
Re: LED equalizer problem

[quote user="Badger"] [quote user="AlanH"] Bob .... i know we are an ocean & continent apart and you speak the Queen's English, Eh but i thought we spoke the same language! [/quote] Two countries divided by a common language Anyway I have cut the heat shrink and measured the...

Posted to Technical Discussion (Forum) by AlanH on 11-06-2008
Filed under: LEQ
Re: LED equalizer problem

[quote user="Badger"] Hi Alan. I have 2 X 4807. I am going to use them with LED indicators, one for the front pair and one for the rears. Just to test the equalizer I opened the headlamp and disconnected one of the incadescent indicators and connected an LED indicator in its place. I then connected...

Posted to Technical Discussion (Forum) by AlanH on 11-04-2008
Filed under: LEQ
Re: Back to the fun fast blinking and load equalizers

[quote user="TECK"] Thanks, Alan. That was exactly what I needed. Out of curiosity, what made you switch from the Signal Dynamics dual load EQ to your custom made product? I originally purchased the Kuryakyn 4807 which is advertised as a 4 amp device which was bogus Read this: LEQ Kuryakyn...

Posted to Technical Discussion (Forum) by AlanH on 06-18-2009
Filed under: Electrical: Click of Death: Solenoid Syndrome, COD, Click of Death, LEQ

Page 1 of 1 (8 items)