in

The Yamaha Road Star Warrior Forum

The #1 site for the Yamaha Road Star Warrior
MotorSportsSuperStore.com
All Tags » How to » Fork Tube Covers (RSS)

Browse by Tags

  • Re: fork tube cover install DONE!!

    Rrufast, check the first album "Chrome Fork Covers and MS Big Shots" for some close up photos. http://www.flickr.com/photos/15071518@N07/sets/72157602601835074/ Without the OEM signal brackets you use the longer pc which goes on the bottom. Read my previous post. Check the photos in the url...
    Posted to Technical Discussion (Forum) by AlanH on 11-07-2005
    Filed under: How to, Fork Tube Covers

  • Re: fork tube cover install DONE!!

    Should be 10 'O-Rings' total 2-thick for the notched end in the top cover. Notching is to clear the cable guide brackets under the top tree. You might need to tweak cable guides. 6-Same size. 4 for the lower covers and 2 for the bottom of the upper cover adapters on the top of the bottom triple...
    Posted to Technical Discussion (Forum) by AlanH on 11-06-2005
    Filed under: How to, Fork Tube Covers

  • Billet Fork Tube Covers & MS Fork Clamps Work with Big Shot 7" Cut-Out Shield!

    Was able to reshape extruded fork clamps supplied with the Big Shot windshield to accommodate the larger chrome fork covers that are 2.310" OD. As a result of the increased diameter also had to replace the 5/8" long clamp screws with 1". The windshield now sits lower by approx 5/8"...
    Posted to Technical Discussion (Forum) by AlanH on 05-23-2005
    Filed under: How to, Fork Tube Covers, Windshield, Memphis Shades Shield
Page 1 of 1 (3 items)
Home | Forums | Photos | News | Classifieds | Warrior of the Month | Contact Us | About Us | Donate | Advertise | Legal & Privacy | Rules
©2002-2009 RSWarrior.com. All rights reserved.
Site created and maintained by Sean Kearney