Browse by Tags

Re: Frame fix for stripped threads (shift bracket)?

The factory bolt is a special steel headed button head bolt M10 x 1.25p x 50mm (1.968") long A modified version of dontcare1357 solution would be to tap out the remaining portion of the hole in the frame to M10 x 1.25p The lower frame is 1.265" OD with .250" thk approx welded boss = 1...

Posted to Technical Discussion (Forum) by AlanH on 07-18-2006
Filed under: Fastener
Fasteners 101

[quote user="RobRiguez"] While I would never challenge your knowledge, I will have to go back and measure again. I could swear they were 6mm x 18mm x 1.25. M6 x 1.25p doesn't exist on planet earth [quote user="AlanH"]As the metric thread pitch number increases the thread becomes...

Posted to Technical Discussion (Forum) by AlanH on 09-22-2008
Filed under: Fastener
Re: Fasteners 101

RobRiguez .... No Problema ....this is the technical discussion forum and you certainly have the right to challenge me and anyone else ... I respect and applaud your contributions here and was just being sarcastic As you stated previously, all that is req'd is a Metric Scale to measure the fastener...

Posted to Technical Discussion (Forum) by AlanH on 09-23-2008
Filed under: Fastener
Re: Stainless Steel engine bolts...

Check the head markings on the OEM socket bolts you plan on replacing. They are marked [ ] They range from Class 8.8 ~ 12.9 [ ] quote: Originally posted by bigbear2592 Thanks for the info, its my guess that for the various covers its about par for the bolt, or am I reading it wrong.

Posted to Installed Warrior Modifications and accessories (Forum) by AlanH on 11-10-2005
Filed under: Fastener
Re: Help w/Foot Bracket Removal!

[quote user="jimmy2"] I dont know what they are made of but dull good drill bits very quickly. Whoever designed those large bolts with such a small allen size needs to be fired. [/quote] Taken from an old topic: Fastener Fable-1 & Fastener Fable-2 This specific Yamaha button hd scr uses...

Posted to Technical Discussion (Forum) by AlanH on 03-27-2008
Filed under: Fastener
Stainless Steel engine bolts...Fastener Fable-2

MrWilson...thanks for the compliment. Here's another fastener fable [ ] Standard Socket Button Head screws are 2 wrench sizes smaller than Socket Head screws of equal thread diameter. The Yamaha Oversized Socket Button Head screws have the same wrench size as Socket Heads! Stainless soc button head...

Posted to Installed Warrior Modifications and accessories (Forum) by AlanH on 11-11-2005
Filed under: Fastener
How to Identify Yamaha Fastener P/N's for Diameter & Length Etc - Yamaha P/N Configuration

[quote user="Vietz2"] Not completely positive about this...but I'm pretty sure, with Yamaha part numbers, for bolt sizes you can just look at the 2nd set of numbers of the part #. So, the part in question is: BOLT,SMALL FLANGE 95027-08016-00 08016 = 8mm X 16mm EDITED : The website I got...

Posted to Technical Discussion (Forum) by AlanH on 09-22-2008
Filed under: Fastener, How to
Missing Brake lever free play bolt - M6 x 0.75 pitch

[quote user="NHWarrior"] ..... So I need M6 .75 25mm. No one carries it in stock, but they can be ordered. I think I am just going to order one at my dealer, they don't charge for shipping and the bolt is about $2. For the time being I bought an M5 with 2 nuts, which I put on eaither side...

Posted to General Discussion (Forum) by AlanH on 10-14-2008
Filed under: Fastener
Re: Front Turn Signal Brackets (Rigid Mounted-Done)

This is where i got the chrome steel button soc hd 8mm x 1.25p x 45mm lg Grade 10.9 pinch bolts for the modification. They also offer the spacer bushing drilled to 5/16" ID in chrome steel. http://www.afchromebolts.com/catalog_metric_allen.html Bolts = $2.38 ea + $3.29 S&H. Took 3 days from...

Posted to Installed Warrior Modifications and accessories (Forum) by AlanH on 03-25-2005
Filed under: Fastener, Front turn signal bracket
Re: '04 Rear axle nut pitch

[quote user="SuicideD_45"] I've searched this site but can't find anything that actually tells me the thread pitch of the M18 rear axle and nut. Anyone have this info? Would really appreciate the help. Thanx [/quote] M18 x 1.5 p Note: You'll want to keep in mind that you'll...

Posted to Technical Discussion (Forum) by AlanH on 05-26-2009
Filed under: Fastener

Page 1 of 2 (12 items) 1 2 Next >