Browse by Tags

Re: Wiring up rear lights with trailer harness?

[quote user="NorCalWarrior"] I'd like to be able to wire everything through the harness so that I can disconnect it if I ever have to, so my question is can I combine the LED plate power and tailight power together (1 and 6), and do the same with taillight ground and LED plate light ground...

Posted to Technical Discussion (Forum) by AlanH on 11-30-2008
Filed under: Electrical
Re: Blowing Signal Fuse When i key on

[quote user="tke24611479"] we have narrow it down to the six wires on the black connector in the headlight that go to the kill switch on the handle bars but the short is on the frame side of the plug not the handle bar side. we think it is the brown wire cause it is coming up with a continuity...

Posted to Technical Discussion (Forum) by AlanH on 07-08-2008
Filed under: Electrical, How to
Help me Guru's! {IAPS & APS Color Coding}

speedyfreek .... i don't claim to be a Guru ... here's info based on my '04' Warrior Here's the info you want from an earlier Topic post: DIY BAK Issues that i responded to earlier this year. Credit goes to Patrick aka sc186 for correcting me regarding the PN's for the engine...

Posted to Technical Discussion (Forum) by AlanH on 08-24-2008
Filed under: Electrical, How to, Sensors
Engine Sensors 101 - Extracts fr Chapter 1 - Hyperlinked

Chapter 1-2 to 1-31 Service Manual General information and features of the F.I. System and sensors as presented in Chapter 1 Crankshaft position sensor 1-11 The crankshaft position sensor uses the signals of the crankshaft position sensor that is mounted on the left side of the crankshaft. When the rotation...

Posted to How To's and General Maintenance Tips (Forum) by AlanH on 08-05-2008
Filed under: Electrical, Sensors
Re: Flasher?

MilwDave .... no need to disturb the flasher at all! The LEQ can be connected to the wiring under the ECU. Follow the rear fender wiring to an Opaque 6~Pin (5-wire) plug and i suggest you tap into the female plug wiring so you can remove the fender if req'd in the future. Here's some photos of...

Posted to Technical Discussion (Forum) by AlanH on 05-12-2007
Filed under: Electrical, How to, LEQ
Electric Starting System Diagram Documentation 101

The referenced diagram: http://www.fileden.com/files/2008/1/1/1673654/My%20Documents/Chapter%207%20pgs%2023-27%20warrior_service_manual.pdf is misleading and difficult to follow if you don't understand the state of the interlock devices that are conditional as shown on the diagram. Here are the state...

Posted to Technical Discussion (Forum) by AlanH on 04-24-2009
Filed under: Electrical, Adjustment or calibration
Re: Wires from clutch lever?????

EDITED : Oops FWIW, the clutch interlock switch is a Normally Closed Contact , held open (NCHO.) when the clutch lever is released (Not operated). When the lever is operated the NCHO contact recloses! Item 8 here: http://www.fileden.com/files/2008/1/1/1673654/My%20Documents/Chapter%207%20pgs%2023-27...

Posted to Technical Discussion (Forum) by AlanH on 04-24-2009
Filed under: Electrical, Adjustment or calibration
Re: Update on cut out problem @ 3000RPM

[quote user="Arizona Warrior"] Maybe someone can check the circuits with those sensors the ECU only reads in 4th and 5th speeds?[/quote]The only Input Device (sensor) that is gear related from the transmission is the Neutral Switch .... if not in Neutral the ECU assumes the bike is in gear...

Posted to Technical Discussion (Forum) by AlanH on 06-10-2008
Filed under: Electrical, LAS, Engine Cutting Out
Warrior Electric Starting System-Enhanced Schematic & More

Taken from Chapter 7, page 23 of the early Yamaha Shop Manual and enhanced with additional critical components, wire color coding and detailed descriptors of the ballooned items. http://www.fileden.com/files/2008/1/1/1673654/My%20Documents/Page%207-23_Warrior%20Starting%20System.pdf Chapter 7, pages...

Posted to How To's and General Maintenance Tips (Forum) by AlanH on 07-04-2008
Filed under: Electrical
Re: Speedo light

[quote user="Kdub"] Anyone ever switched out there speedometer light and tach light. I wanna do red because my bike is red but dont know where to start. Where do you get a red replacement bulb? [/quote]Yup ... this too has been done early on Here's an early topic Tach/Speedo Backlighting...

Posted to Technical Discussion (Forum) by AlanH on 08-13-2009
Filed under: Electrical, How to

Page 2 of 3 (23 items) < Previous 1 2 3 Next >