Browse by Tags

Re: Starting

Tausch ... my .02 follows ....after reviewing your gallery inventory, assuming it's up-todate , noting that you're running the stock frt & rear turn signals less the license plate light and have the OEM decomp and cam covers simplifies the trouble shooting process. Some of the aforementioned...

Posted to Technical Discussion (Forum) by AlanH on 02-05-2009
Filed under: Electrical
Warrior Wiring Diagram w/Text Descriptors Added

Current URL for Warrior Wiring Schematic (USA) w/Text Descriptors & Documentation located in my Bike Gallery: http://www.rswarrior.com/Gallery/AlanH.aspx If the enclosed url doesn't load check for an updated version in my gallery    Ballooned items are clearly identified...

Posted to How To's and General Maintenance Tips (Forum) by AlanH on 03-15-2008
Filed under: Electrical
Re: DIY BAK Issues

quote: Originally posted by sc186 Thanks for the amateur psychoanalysis. You are welcome [ ] Cant find anything specifically citing the four digits, only which harness corresponds to which pressure source. My apparently flawed logic would suggest that one pressure transducer is as good as the next, so...

Posted to Technical Discussion (Forum) by AlanH on 02-27-2008
Filed under: Electrical
Re: Coil Relocation - where to run the loom?

fierysport ... Here's your fix [ ] The Pink/White wire belongs on the rear Intake APS Cyl 1 as i stated in the Yankee forum. Be sure you have the vacuum line connected as shown. Happy to see you solved your self inflicted problem [ ] LOL ozwarrior ... thanks for the compliment [:I] It never...

Posted to Australia (Forum) by AlanH on 08-06-2007
Filed under: VBAK, Electrical
Re: Urgent Help Needed - Coil Relocation Problems

1. That's the Engine light that's on. There is no oil light on the Warrior 2. Unless you were on reserve when you pulled your tank there isn't a problem. I've ridden around without my gas tank and not have the lamp come on. 3. Sounds like you might have swapped a connector or wires. The...

Posted to Technical Discussion (Forum) by AlanH on 08-05-2007
Filed under: Electrical, VBAK
Re: bike will not idle and pops through throttle body

This sounds familar. See if these threads help you out: http://rswarrior.com/forums/p/25983/378121.aspx#378121 http://rswarrior.com/forums/p/57975/820755.aspx#820755 Edited: The black plug for the atmospheric pressure sensor that doesn't have a vacuum hose has a solid pink wire! The No. 1 cyl (Rear...

Posted to Technical Discussion (Forum) by AlanH on 08-09-2007
Filed under: Electrical, VBAK
Switch Box Housings & Rocker Switch Assemblies - ** Caution **

This is, IMO, a must read for those of you that are planning to R&R your switch box housings with chrome or polished parts. The fatality rate of the Kill Switch ( engine cut-off switch ) is quite high on this sight and is self-inflicted by the installer. Reading this topic will assure a successful...

Posted to How To's and General Maintenance Tips (Forum) by AlanH on 12-04-2008
Filed under: Electrical, How to, Switch Box Housing
Re: Spark Plug Wire Mishap!

[quote user="Justice"] So, when I was fiddling around with my coil/sensor plate under the tank, I pulled the front right spark plug wire right out of the boot on the jug! Ooops. I pushed it back in there as best I could, but I know it's not connected... Do I need to replace the wire and...

Posted to Technical Discussion (Forum) by AlanH on 12-04-2008
Filed under: Electrical, Coil Wires
Re: Need help from Electrical guru's

SuicideD_45 ..... There is only 1 Grnd wire in the fender harness if you check the plug under the ECU in the wire tray ....The Grnd wire is branched for each device separately at the rear taillight so no problema. Throw some tape over the 2 empty female snap connectors. I see you have the Yamaha IFEK...

Posted to Technical Discussion (Forum) by AlanH on 08-01-2008
Filed under: Electrical
Re: 12V load equalizer question - integrated taillight

[quote user="tostyj"] I bought some 12V load equalizers to slow down my the blinkers; they blink too fast as a result of my integrated taillight install. I know that I should tap into the wire harness that leads back to the taillight under the seat, but I have a question: Do you hook them up...

Posted to Technical Discussion (Forum) by AlanH on 05-31-2008
Filed under: rear light, tail light, taillight, rear turn signals, Electrical, LEQ

Page 1 of 3 (23 items) 1 2 3 Next >