You searched for the word(s): userid:14912
-
Changed my oil tonite,everything went fine thanks to all the members input on my questions.Thank you.Question is I realized that when I drained my oil out of my tank I forgot to lean the bike up straight or tip it to the right slightly. How much oil does this leave in my tank or is this leaning the bike not necessary. Also I did not change the crush washers,Is that a problem or do you have to change them every oil change,This is the second oil change on the bike thanks
-
I am changing my oil ,I know about the 2 plugs,Question is people say to pour half the oil in the oil tank start for 10 seconds, then pour rest in oil tank.Is the filler for the oil tank under the seat where the dipstick is or is it in another location ??? dont want to mess this up .
-
Guys are talking about oil tank covers and pulling them off,that is what was confusing me.So the oil gets poued into the oil tank and the opening for that is under the seat where the dipstick is
-
Need to change my oil Book says 20w40 yamalube4, or sae20 w 40 API Service SG or higherJASO Standard. Is this just automotive oil?? Can I use 10 w 40??? Is 10w 4o heavier oil or lighter oil??? I have Kendall10 w 40 in there from the dealer.Just want to use the oil that will do the job,Shifts good now, Thanks
-
I just brought my bike to get 2 tires on it ,pick it up today and get home after driving 20 miles or so,notice the lower belt guard is rubbing against the pulley that the belt goes around on the rear tire.Iguess you call it a pulley. I pull up the schematics and see that there are spacers behind the bolts that hold the guard on. I also notice that the belt is rubbing on the lower belt guard sight window area as there is plastic fray in the window.The spacers are in the right place and the guard still
-
They are installing the pipes and the fi2000r module and the brake relo for $150. For that I could be somwhere making that with less aggravation.
-
I am putting pipes on my yamaha.The honda kawasaki shop is close to me and said they would install the pipes for half the price of the yamaha dealer and they are a lot closer to me.Do I have to change the gaskets when these pipes are put on,and and if they have to be changed are they pretty much available to any dealership or do they have to be yamaha gaskets??or is a gasket a gasket??
-
How do you disconnect the dry breaks ??they just unclip?? Also if i remove the tank do I need to remove the air filter housing to get to the connections for the fi 2000 to install that thanks
-
Just bought these pipes ,looked inside the pipe seems there is a baffle in them,do you guys that have these pipes run these baffles?? I assume I should because they come with them?? My friend has the same pipes and his sound awesome I gotta take a peek inside of his .
-
I bought a plug and play fi2000r unit for my 07bwarrior from cobra, I am waiting on the pipes angled slash cuts.The instructions say unbolt gas tank and lift up and take off air cleaner.then plug in unit.does the tank pivot?? are the wires under neath it??.Is it obvious which connectors I need?? Does the unit sit under the seat?? thanks