The Yamaha Road Star Warrior Forum

mdfdwarrior:

let us know when you find out.  I never did find out if it fit the stock Warrior in the area where the right foot control is.  It seems rather thick to fit that area without mods to the right foot control placement....

As for the 280, it seems doable since the muffler section is so short....

If it all fits, I'd be willing to get in on a set w/ you if it helps the pricing any.....  

I'd like the Sick 4 as well.  So you can count me in as well.

As for the right foot control, Low and Mean recommends forward controls.  I can't really go that, as short as I am.  My Dually Iso pegs stick out pretty far though, so I think, it'll still work.

it's not how far the pegs stick out but rather the space afforded by the stock foot control mounts...I doubt this exhaust can fit with the stock foot mounts b/c the pipes are double-wide in that area due to the design....

it would be good to know for sure though.  I had no success trying to find out.  My best efforts resulted in a photoshopped pic of the exhaust on the Warrior by them....

GNO:

mdfdwarrior:

let us know when you find out.  I never did find out if it fit the stock Warrior in the area where the right foot control is.  It seems rather thick to fit that area without mods to the right foot control placement....

As for the 280, it seems doable since the muffler section is so short....

If it all fits, I'd be willing to get in on a set w/ you if it helps the pricing any.....  

I'd like the Sick 4 as well.  So you can count me in as well.

As for the right foot control, Low and Mean recommends forward controls.  I can't really go that, as short as I am.  My Dually Iso pegs stick out pretty far though, so I think, it'll still work.

 

mdfdwarrior:

it's not how far the pegs stick out but rather the space afforded by the stock foot control mounts...I doubt this exhaust can fit with the stock foot mounts b/c the pipes are double-wide in that area due to the design....

it would be good to know for sure though.  I had no success trying to find out.  My best efforts resulted in a photoshopped pic of the exhaust on the Warrior by them....

This one?

I'm in if we can get a better group price.  Keep me updated when this might happen.

thanks -bk

Sorry bringing this one back to life. Installed mine in June. Yes the S-4s sound great I do greatly suggest though that if you dont like the backfiring you might want to do the AIS block off ( the backfires are loud as hell ) shot a flame out of it. I unfortunately have not done the AIS yet. Yes as we can see the pipes will blue if you are too lean. As for all clearance questions: The right hand turn im sorry but no info there I was off the bike for nearly a year so I didnt push it that far. I think with the heigth of the outer pipe it might just clear. Outer pipe does unfortunately extend a bit over the peg mount, leaves you a bit limited on room for your right foot. If you are short legged like me standing at a stop does take some effort to avoid the pipes as they are quite hot, you can see what they did to the pants on the first ride.These pipes are wide the hell open you can see the down pipe openings from the end of the chamber, LOUD!!! Oh but do they grab some attention. The only problem that I have had with the pipes besides heet and right foot room was that there is a torque-x screw that they are required EPA to use to hold the tip and baffle assembly in the chamber. When Installed the pipes I left the wrapping on so i didnt damage them during the install and missed the screw. I suggest that before the istallation you go by a parts store and get the adapter for the screw and pull it and apply some lock tight to prevent it from coming out. There is enough vibration for it to come loose. Mine came off and I lost the tip and baffle at 60mph with my wife on the back. With that said my dealings with the manufacturer has been EXCELLENT! Doug was an extreme help. Even though the tip and baffle incodent was not considered to be under warranty the owner aggreed to strip and repair if not replace the tip, replace the screw, and replace the glass packing. Very Good Customer Support! As for the vibrations you never really notice the vibes that it does have, cant hear it either. LOUD! There is a visible vibe in the pipes at what rpm range not to sure i didnt catch it, but when you bust these things wide open the vibe stops and they are just WICKED SICK! If anyone has any questions about these just shoot me a PM. Im sorry but I do not have a map for them yet

Those look bad ass!

 Let us know if they scrape at all on you.

 BTW, are we still getting these pipes at the discounted rate?

I was the first post since june i dont know if that is still in the air or not. Unfortunately I did not know about this thread when I bought mine back in March. Price is 699 USD. Shipping depends on where you buy them. Delivery typically quick if in stock. Mine took a minute store and factory was out of stock at the time had to wait for them to be manufactured they currently come chrome, black, and aluminum finish

Any scraping yet?

Sorry no scraping yet. Unfotunately Im in Iraq currently. Ill be home in Oct so hopefully I can get on it before Upstate NY weather hits ill try to get it over far enough to see if they hit. Ive had it on the peg mount before so its doable for me. If not ill get some one to give me a hand laying it over to the side and see if they hit.

I appreciate it, man.

 Thanks for your service!