The Yamaha Road Star Warrior Forum

What are these things supposed to run factory out of the box????Mine is an 02 with bub exhaust and a power commander....

12.5-ish.  When you see a post like this: http://rswarrior.com/forums/t/29676.aspx you need to remember that the 2-2 exhaust will SLOW you down.  Its very possible for a bone-stock Warrior to deliver a lower ET - with the rider weight and skill  as large variables.

 I would be shocked if you posted sub 13 times.  Course, your weight and experience can weigh in here as well. But my guess is low 13's.  

A couple of warriors around here were at 13.3 with the same mods

My best time on an 05 W/pro pipe, pcIII w thier map , force winder air intake, factory air cleaner under tank, 12.53@102.6 1/4mile, 7.90@86.2,.. 1/8mile, same pass at about 10ft above sea level.

 After installing samson street sweepers and a pcIII with stock air filters,I ran 13.25 @106mph. I could easily have run in the mid 12's but my tire broke loose several times off the line. I lost a lot of torque going to the 2n2 pipes, but they sound much better, and look a whole lot better!

I've got samson shorties, barons bak and bumped up ecu on an avon fully aired and I was running 12.6 at 104mph. It was also my first time dragging a bike, so im sure there is a tenth or so to gain in there.

I've since then added a 31 tooth pulley, so im going to try to make it back to the track this spring.

Camel:

I've got samson shorties, barons bak and bumped up ecu on an avon fully aired and I was running 12.6 at 104mph. It was also my first time dragging a bike, so im sure there is a tenth or so to gain in there.

I've since then added a 31 tooth pulley, so im going to try to make it back to the track this spring.

Thats a good run, for those mods!

Trying to go from memory. I did a project for a Columbus OH dealership.

Off the showroom floor was 12.7. Pipe and DFO 12.4 and after Speed* kit 11.6.

Pretty sure those are the numbers. Did a story on the build in 03 I think.

I found the artical and corrected the times. I could post the story if anyone is interested. Seems like a long time ago...

Underdog88:

Trying to go from memory. I did a project for a Columbus OH dealership.

Off the showroom floor was 12.7. Pipe and DFO 12.4 and after Speed* kit 11.6.

Pretty sure those are the numbers. Did a story on the build in 03 I think.

I found the artical and corrected the times. I could post the story if anyone is interested. Seems like a long time ago...

I would be interested for sure! 12.7 I would love to see a vid of that, just to see that monster go so silently down the strip at that speed would be fun. 

I uploaded the old story here for you guys.

http://www.twistedimagecycles.com/arena.html

 Very nice writeup Underdog. Even if it is old.

tried to post video but...

guess I'll have to try the FAQ section.

 If you are still having issues email it to me and I can give it a go! jonathan@starpowersports.com