Just want to confirm I'm running a 33t front and going to get the 65t rear belt size 128 ?
Yup, thattle work...
If I go to a 1.5" wide pulley will I have clearence issue with swing arm.
Does pulley mount same as stock pulley drilled out holes to the outside ?
Any additional info. would be greatly appreciated !!!!
There's a couple of guys who put in a 1.5". I think it fits just fine... You should prolly check with Alan
Just realized, I never put up any pics.
I am planning on putting the 65 tooth rear pulley on my warrior but i am going to leave the stock front pulley on it for now. What performance differences will I see without changing the front pulley? Also, will I need the 128 tooth belt if I just change the rear pulley?
I think you'll get used to the performance difference in just a few miles. 70mph on the GPS should be about 2600revs.
And YES, you will need the 128!
devils backbone warrior: If I go to a 1.5" wide pulley will I have clearence issue with swing arm. Does pulley mount same as stock pulley drilled out holes to the outside ? Any additional info. would be greatly appreciated !!!!
i did the 1.5" belt mod with a g&s 260 swing arm and had to shave off a little bit of the swing arm to keep the lower part of the belt from rubbing. it was a tight fit for me