Here is more pics and closer up too. Yes I know my bike is dirty, it was raining and we had 35mph winds and it took my bike cover off.
The filters are K&N RU-0990's. I used a white pvc 90 deg. 1.5"
street elbow and a silicone connecter that I had for the one under the
tank. For the outside one I used one of the stock elbows inside the
stock air intake(the one that does not an extra hole in it after you
remove it from the bike) and cut it down where it connects to the black
box under the tank. I then took another 1.5" 90deg. pvc street elbow,
painted black and stuck it in the end of the stock tube, then hooked the filter on to
the end. I used a couple of zip ties to hold it all in place so it wont
move around too much.
This pic is from another post.