I would appreciate anyone running w/o a rear rotor cover answering this question please:
Using a straight edge or flat bar across the inner surface of the machined rotor close to the hub ..... is there clearance/gap between the bottom of the straight edge and the powdered coated hollowed cast wheel casting or does the straight edge touch?
CREDIT ACKNOWLEDGED TO JIMMY2 FOR THE USE OF HIS GALLERY PHOTO EVEN THOUGH IT'S A 5-SPOKE
Thanks
Thought that looked familiar. Yes there is a gap. 3/16 or so.
yes, there is a gap. i made a custom rotor cover that is flat and bolted right up.
Trick: yes, there is a gap. i made a custom rotor cover that is flat and bolted right up.