Announcements : Help

Proper Tagging

CarKnee — Mon, 22 Dec 2008 14:58:00 GMT

There is a huge feature of this site that has been disabled because people have been missusing it. The feature I am referring to is Post Tagging in forum posts. I have just turned this feature on (in the Warrior Forums) in the hopes people will begin to use it properly as this can be a huge benefit in locating information you need.

What a tag isn't?
A tag is not a spot for you to enter in your signature line. It isn't a spot to enter in some funny quote. It isn't a spot to say something like "warrior."

What is a tag?
Tags are like keywords or labels that you add to a post to make it easier to find later. You can tag a post with phrases like "2002 TPS Recall." Later if you look for information of the TPS recall, you can just click that tag and get all posts that have been tagged that way.

What is the difference between searching and posting?

A search will return posts where the computer finds your term in the body of the post.
A tag search will return posts where humans explicitly associate a term to a post

How will Tag's help me?
Once all members are in the habit of tagging their posts the "Tag Cloud" will start to populate with keywords. The tag cloud is in the right column of the Forum titled "Popular Tags." Once you click a "tag" it will take you to a listing of all posts tagged to that term.

Tags Dumbified
For this site I have made it so that people cannot enter in their own tags in forum posts. You must use the "Chose Tags" button to select some predefined tags.

Example. This post is tagged to "Help" and "New Site" as shown below. If you click on a tag it will take you to a list of all other related posts.

I hope this feature works out and people start using it as it should. If it is used properly I can enable it site wide and make it so that people can enter in their own tags.

Emoticons. aka Smilies

CarKnee — Mon, 19 May 2008 13:14:00 GMT

A few people have had a hard time with the pop-up smilie window, but that window is not the 'end all be all' way to get smilies in your posts! You can manually type a smilie in using standard BB code brackets "[]" with the desired smilie in between!

Here is a list of all smilies available. To use them, just place the code in between brackets!

Code	Image	Description
:)		Smile
:D		Big Smile
:O		Surprise
:P		Stick out tongue
;)		Wink
:(		Sad
:S		Tongue Tied
:\|		Indifferent
:'(		Crying
:$		Embarrassed
H		Cool
:@		Angry
A		Angel
6		Devil
8-\|		Geeked
:#		Zip it!
:-*		Whisper
:^)		Huh?
<:o)		Party!!!
\|-)		Sleep
Y		Yes
B		Beer
{		Left Hug
8		Music
*		Star
O		Time
sn		Snail
pi		Pizza
au		Automobile
um		Umbrella
co		Computer
st		Storm
mo		Moon
8o\|		Super Angry
^o)		Hmm
+o(		Ick!
*-)		Confused
8-)		Confused
C		Coffee
N		No
D		Drinks
Z		Person
}		Right Hug
^		Cake
U		Broken Heart
G		Gift
W		Wilted Flower
~		Movie
&		Dog
I		Idea
S		Sleep
E		Email
ap		Travel
ip		Paradise
li		Lightning

How to Search RSWarrior.com

CarKnee — Sun, 06 Apr 2008 14:50:00 GMT

This information, and more, is available at http://docs.communityserver.org/wiki/page.aspx/187/enterprise-search/

Terms

A query is broken up into terms and operators. There are two types of terms: Single Terms and Phrases.

A Single Term is a single word such as "test" or "hello".

A Phrase is a group of words surrounded by double quotes such as "hello dolly".

Multiple terms can be combined together with Boolean operators to form a more complex query (see below).

Note

The analyzer used to create the index will be used on the terms and phrases in the query string. So it is important to choose an analyzer that will not interfere with the terms used in the query string.

Fields

Lucene supports fielded data. When performing a search you can either specify a field, or use the default field. The field names and default field is implementation specific.

You can search any field by typing the field name followed by a colon ":" and then the term you are looking for.

As an example, let's assume a Lucene index contains two fields, title and text and text is the default field. If you want to find the document entitled "The Right Way" which contains the text "don't go this way", you can enter:

 title:"The Right Way" AND text:go

 title:"Do it right" AND right

Since text is the default field, the field indicator is not required.

Note

The field is only valid for the term that it directly precedes, so the query

 title:Do it right

Will only find "Do" in the title field. It will find "it" and "right" in the default field (in this case the text field).

Term Modifiers

Lucene supports modifying query terms to provide a wide range of searching options.

Wildcard Searches

Lucene supports single and multiple character wildcard searches.

To perform a single character wildcard search use the "?" symbol.

To perform a multiple character wildcard search use the "*" symbol.

The single character wildcard search looks for terms that match that with the single character replaced. For example, to search for "text" or "test" you can use the search:

 te?t

Multiple character wildcard searches looks for 0 or more characters. For example, to search for test, tests or tester, you can use the search:

 test*

You can also use the wildcard searches in the middle of a term.

 te*t

Note

You cannot use a * or ? symbol as the first character of a search.

Fuzzy Searches

Lucene supports fuzzy searches based on the Levenshtein Distance, or Edit Distance algorithm. To do a fuzzy search use the tilde, "~", symbol at the end of a Single word Term. For example to search for a term similar in spelling to "roam" use the fuzzy search:

 roam~

This search will find terms like foam and roams.

Starting with Lucene 1.9 an additional (optional) parameter can specify the required similarity. The value is between 0 and 1, with a value closer to 1 only terms with a higher similarity will be matched. For example:

 roam~0.8

The default that is used if the parameter is not given is 0.5.

Proximity Searches

Lucene supports finding words are a within a specific distance away. To do a proximity search use the tilde, "~", symbol at the end of a Phrase. For example to search for a "apache" and "jakarta" within 10 words of each other in a document use the search:

 "jakarta apache"~10

Range Searches

Range Queries allow one to match documents whose field(s) values are between the lower and upper bound specified by the Range Query. Range Queries can be inclusive or exclusive of the upper and lower bounds. Sorting is done lexicographically.

 mod_date:[20020101 TO 20030101]

This will find documents whose mod_date fields have values between 20020101 and 20030101, inclusive. Note that Range Queries are not reserved for date fields. You could also use range queries with non-date fields:

 title:{Aida TO Carmen}

This will find all documents whose titles are between Aida and Carmen, but not including Aida and Carmen.

Inclusive range queries are denoted by square brackets. Exclusive range queries are denoted by curly brackets.

Boosting a Term

Lucene provides the relevance level of matching documents based on the terms found. To boost a term use the caret, "^", symbol with a boost factor (a number) at the end of the term you are searching. The higher the boost factor, the more relevant the term will be.

Boosting allows you to control the relevance of a document by boosting its term. For example, if you are searching for

 jakarta apache

and you want the term "jakarta" to be more relevant boost it using the ^ symbol along with the boost factor next to the term. You would type:

 jakarta^4 apache

This will make documents with the term jakarta appear more relevant. You can also boost Phrase Terms as in the example:

 "jakarta apache"^4 "Apache Lucene"

By default, the boost factor is 1. Although the boost factor must be positive, it can be less than 1 (e.g. 0.2)

Boolean operators

Boolean operators allow terms to be combined through logic operators. Lucene supports AND, "+", OR, NOT and "-" as Boolean operators(Note: Boolean operators must be ALL CAPS).

OR

The OR operator is the default conjunction operator. This means that if there is no Boolean operator between two terms, the OR operator is used. The OR operator links two terms and finds a matching document if either of the terms exist in a document. This is equivalent to a union using sets. The symbol || can be used in place of the word OR.

To search for documents that contain either "jakarta apache" or just "jakarta" use the query:

 "jakarta apache" jakarta

 "jakarta apache" OR jakarta

AND

The AND operator matches documents where both terms exist anywhere in the text of a single document. This is equivalent to an intersection using sets. The symbol && can be used in place of the word AND.

To search for documents that contain "jakarta apache" and "Apache Lucene" use the query:

 "jakarta apache" AND "Apache Lucene"

+

The " " or required operator requires that the term after the " " symbol exist somewhere in a the field of a single document.

To search for documents that must contain "jakarta" and may contain "lucene" use the query:

 +jakarta apache

NOT

The NOT operator excludes documents that contain the term after NOT. This is equivalent to a difference using sets. The symbol ! can be used in place of the word NOT.

To search for documents that contain "jakarta apache" but not "Apache Lucene" use the query:

 "jakarta apache" NOT "Apache Lucene"

Note

The NOT operator cannot be used with just one term. For example, the following search will return no results:

 NOT "jakarta apache"

-

The " - " or prohibit operator excludes documents that contain the term after the " - " symbol.

To search for documents that contain "jakarta apache" but not "Apache Lucene" use the query:

 "jakarta apache" -"Apache Lucene"

Grouping

Lucene supports using parentheses to group clauses to form sub queries. This can be very useful if you want to control the boolean logic for a query.

To search for either "jakarta" or "apache" and "website" use the query:

 (jakarta OR apache) AND website

This eliminates any confusion and makes sure you that website must exist and either term jakarta or apache may exist.

Field Grouping

Lucene supports using parentheses to group multiple clauses to a single field.

To search for a title that contains both the word "return" and the phrase "pink panther" use the query:

 title:(+return +"pink panther")

the following is a list of fields defined in CS2 Enterprise Search:

 body
 rawbody
 role
 url
 link
 name
 app
 sectionid
 postid
 date
 user
 userid
 title
 settingsid
 applicationtype
 applicationkey
 groupid
 parentid
 threadid
 exact
 attachmentname
 attachmenttext
 tag
 tagkeyword

Escaping Special Characters

Lucene supports escaping special characters that are part of the query syntax. The current list special characters are

+ - && || ! ( ) { } ^ " ~ * ? : \

To escape these character use the \ before the character. For example to search for (1+1):2 use the query:

 \(1\+1\)\:2

For multiple word searches without "and" "or" or "not", "OR" is assumed by default.

Searching now searches for near matches in post bodies, attachment names, titles, author name, tags and index-able attachments; additionally it searches for exact matches in the Category/Tag, Author Name, and SectionName fields without requiring additional syntax (Although it still supports the advanced syntax, which might make specific data easier to find) (currently all fields searched have equal weight, which could make searching on a common term, especially one used in a tag difficult, as lucene will score matches higher if they occur in a short field)

The New RSWarrior.com

CarKnee — Sun, 16 Mar 2008 01:00:00 GMT

Welcome to the new RSWarrior.com!

A lot of time and work went into this upgrade; it has been in the works for 2+ years! There are a lot of new features and enhancements, but there are also some features we have all grown to love that are no longer here.

Get new password

First things first, you will need to request a new password for this site. All of your profile information has been brought over, but we needed to reset the passwords. Please click here to request a new password be sent to you.
http://rswarrior.com/user/EmailForgottenPassword.aspx

Edit your profile

Once you have your password, please log in and proceed to edit your profile:
http://rswarrior.com/user/EditProfile.aspx

Add an Avatar

You want to make sure that all of your information is correct. Also, to set an avatar, first click "Yes" to enable and ten hit save. Step 2 is to select an avatar and hit "update."

Common Links

Active Topics - http://rswarrior.com/forums/TopicsActive.aspx

Member List - http://rswarrior.com/user/Members.aspx